Quick Guide On How To Troubleshoot Submersible Pumps Issues

A submersible pump is one of the major equipment used in various types of property because it helps draw water for various installations such as a garden fountain, an artificial pond or simply any other water reservoir. These equipment are used on a daily basis and as is the case with all machines, they too have issues – major and minor. For instance, sometimes your pump may not start, it may not bring water in as usual and sometimes there could be damages in a certain part of the pump.

If these problems are not taken care of soon enough, then you might end up replacing the pump prematurely. You wouldn’t want all your investment to go down the drain just like that, would you? This is why it is important for you to know some basic troubleshooting steps for the pumps, which can be taken care of without having to depend upon the experts in the field. These will help save your time, relieve your stress and also save your money.

Here is a quick guide on troubleshooting submersible pumps in your property. Go through them to know more:

Begin With Basics

First and foremost, you need to know the basics about the type of pump that is installed in your property. Ask your architect or property planner about it and start reading about the same from various sources that are easily available online. Once you know about the pump and its working, it will become quite easy for you to understand the anomalies with it and how you can solve them.

For instance, if the pump is not running properly, you can immediately check it for a leaking pipe, lack of water in the tank or some other malfunctions. This will help you decide whether you need to hire professionals to sort out the problem, or do it yourself. However, if the problem still persists after having done whatever you could do, immediately dial the number of pump experts such as Australian Industrial Pump Systems.

When the Pump Doesn’t Start

Submersible pumps start showing signs of trouble when they won’t start as usual. Most people would immediately start worrying and consider replacing them. Again, the concept of trying to think from the basics helps here. Check if the power supply is working as intended. Use a voltmeter to confirm the same.

If this is not the case, then it might be a completely different issue related to the power station and may have nothing to do with the pump. In other cases, the power supply might be blocked owing to the overload protection box. Sometimes, faulty fuses can also be the root of all the trouble. So, check whether all the fuses are intact or not. If they are blown, replace them and reset the breaker in case it has been tripped automatically, in order to avoid any damage.

If the pressure switch in the submersible pump is damaged, then too the equipment will fail to start. In this case, you need to make sure the switch is closed and check if it is receiving enough voltage. If a contact doesn’t exist, clean it and replace the switch. This should get your product running in no time.

When Pump Doesn’t Deliver Water

When the submersible pump doesn’t deliver water, the trouble might be caused due to problems in the air flow, low water levels, leaking pipes or simply old and worn out parts. In such cases, the best decision is to replace the damaged parts. There are many suppliers of high quality pump components from whom you can get products that are durable and give you best value for your money. If the pump is way too old and shows signs of damage, you need to change the entire pump for best results and then maintain the new pump in the best way, right from the start!

To sum it up

Troubleshoot your pumps by using these simple steps and you are sure to avoid a whole lot of stress associated with the same. I am sure these will help you keep all the water bodies in your property working fine. Keep watching this space for more such write-ups.